Power fact sheet

Battery & charger for your Panasonic Lumix TX2 (DC-TX2)

Compact camera

Information from Panasonic on battery, charging and memory cards – as of 01/10/2026.

Battery: DMW‑BLG10 (7.2 V)
Shots per battery charge: approx. 370 using the monitor · approx. 250 using the viewfinder (CIPA)
Video per battery charge: approx. 45 min using the monitor (actual recording in 4K (MP4, 4K/100M/30p) using the monitor, according to Panasonic)
Charging in the camera: Yes – in the camera via the [USB/CHARGE] port with the supplied power adapter and USB cable (approx. 190 min) or from a PC, only when the camera is switched off
Power via USB: No – charging only when the camera is switched off; mains operation with power adapter DMW‑AC10 and DC coupler DMW‑DCC11 (both available separately)
Memory cards: SD/SDHC/SDXC (UHS‑I, UHS Speed Class 3)
Weight: approx. 298 g without battery and memory card

Measurement conditions according to Panasonic: CIPA standard, Panasonic SDHC card and supplied battery (one shot every 30 s, zoom with every shot, flash on every second shot, switched off for 10 min after 10 shots); with viewfinder and [LVF Display Speed] set to [ECO 30fps] approx. 350 shots. Actual video recording time using the monitor: AVCHD FHD/17M/60i and MP4 FHD/28M/60p approx. 50 min, MP4 4K/100M/30p approx. 45 min.

Charging and power via USB: information from Panasonic on the camera – we have not tested whether it also charges replacement batteries in the camera.

Sources (2) · retrieved on 01/10/2026

Panasonic and Lumix TX2 are trademarks or product names of their respective owners. Baxxtar is an independent brand and is not affiliated with Panasonic – the names only show which camera our products fit.

Battery check for your camera

Which Baxxtar battery fits?

According to Panasonic, the Panasonic Lumix TX2 uses the DMW‑BLG10 battery – Baxxtar offers it as a single battery, in a twin pack and in a set with a charger.

Baxxtar DMW‑BLG10: 1000 mAh · 7.2 V · 7.2 Wh

View matching batteries & sets

Not your camera? Choose another model

Baxxtar DMW-BLG10 battery, compatible with the Panasonic Lumix TX2

Switching cameras

Your Baxxtar DMW‑BLG10 also fits …

According to our compatibility list, the Baxxtar DMW‑BLG10 also fits these 24 cameras. If you switch to one of them, you can keep using your Baxxtar batteries and charger.

Lumix G100
Lumix G110
Lumix GF6
Lumix GX7
Lumix GX9
Lumix GX80
Lumix GX85
Lumix LX100
Lumix LX100 II
Lumix TZ80
Lumix TZ81
Lumix TZ90
Lumix TZ91
Lumix TZ92
Lumix TZ93
Lumix TZ96
Lumix TZ99
Lumix TZ100
Lumix TZ101
Lumix TZ200
Lumix TZ202
Lumix ZS70
Leica C‑Lux
Leica D‑Lux 7

Battery planner

How many batteries do you need?

Set how much you shoot or film in a day – the planner works with the figures from Panasonic for the Lumix TX2.

Photos per day 800 Allow for a reserve – one extra batteryAccording to Panasonic, battery life is shorter at low temperatures (such as on a ski slope), with frequent use of flash or zoom, with a prolonged wireless LAN connection and when [4K Pre-Burst] is set.

Guide value

4battery charges

Battery in the camera + 3 spare batteries – for example, a twin pack + a single battery.

A guide value, not a guarantee: based on approx. 250 shots using the viewfinder per battery charge (CIPA figure from Panasonic for the Lumix TX2, a standardised comparison test) or approx. 45 minutes of video (actual recording in 4K (MP4, 4K/100M/30p) using the monitor, according to Panasonic). According to Panasonic, the actual runtime depends on the conditions of use; we have not measured these figures with Baxxtar batteries.

Products