Battery & charger for your Fujifilm X-E4

Battery

NP‑W126S (7.2 V)

Note on the battery

According to Fujifilm, the NP‑W126 and NP‑W126S fit the same cameras; the NP‑W126S is the successor to the NP‑W126, which is no longer sold, with the same capacity and the same number of shots; the NP‑W126 can also be charged via USB

Shots per battery charge

approx. 460 using the monitor · approx. 430 using the viewfinder (CIPA)

Video per battery charge

approx. 45 min (CIPA, actual recording in 4K at 29.97p, face detection off)

Charging in the camera

Yes – via the USB‑C port with the camera switched off; according to the manual from a computer (directly, not via a USB hub; at 5 V/500 mA approx. 5 hours), according to the Fujifilm FAQ also from a USB PD-certified power bank (Fujifilm states 5 V/1.5 A); the battery does not charge while the camera is switched on; for charging from a wall socket, Fujifilm names the separately available charger BC‑W126S

Power via USB

Yes – if ‘USB POWER SUPPLY SETTING’ is set to ON in the connection settings, the switched-on camera draws power from the connected device (according to the Fujifilm FAQ, 5 V/1.5 A); the battery is drained less as a result, it is not charged in this case, and its charge level drops slowly

Memory cards

One slot: SD (UHS‑I)

Weight

approx. 364 g with battery and memory card (body only approx. 315 g)

Measurement conditions according to Fujifilm: CIPA standard, measured with the supplied NP-W126S battery and an SD card, XF35mmF1.4 R lens, without external flash, P mode, performance setting ‘Normal’; with ‘Boost’, approx. 270 shots according to Fujifilm (monitor and viewfinder alike); video with face detection off.

Charging and power via USB: information from Fujifilm on the camera – we have not tested whether it also charges replacement batteries in the camera.

Fujifilm and X-E4 are trademarks or product names of their respective owners. Baxxtar is an independent brand and is not affiliated with Fujifilm – the names only show which camera our products fit.